[Dx4win] Freq logged in DX4WIN

[N7KA at comcast.net]

I am not sure if I have a DX4WIN problem, using V8.05, or an ELECRAFT K3 problem. 



When in simplex/transceive the RX/TX freq of the K3 (VFO=A and VFO=B) is the same.  OK, that's normal.  However when I go to SPLIT operation on the K3 the frequency displayed and logged in DX4WIN is the TX (VFO=B) freq which can be from 0 to whatever KHz removed from the RX freq. 



Example of problem:  During SPLIT operation mode  RX = 14.024.00 (VFO A on K3),   TX = 14029.00 (VFO B on K3).  DX4WIN displays and logs 14029.00. 



How do I get the RX freq to be indicated and logged in DX4WIN? 



A friend using DX4WIN V8.04 and an ICOM IC-746PRO correctly indicates and logs the RX freq in SPLIT operation. 



OK, it may seem a minor point but it is more important to me to log the DX station TX freq (my RX freq) than it is to log my TX freq. 





>From a friend who has K3 and DXLAB, both the RX and TX freq are indicated and logged.  Maybe this is a feature that can be added to DX4WIN??? 



Arne N7KA 




Arne N7KA