[Dx4win] DX4Win and USB Ports

[Kostas Stamatis]

You will need some usb to serial convertrers. Dx4win has not problems. I 
have tried old computer with many programs loaded and dx4win still plays. 
But some other programs (like writelog) are very sensitive with cw keying 
via a usb port. Winkeyer is a very good alternative solution on this subject 
and is supported by dx4win if you want to buy one. If you have a simple cw 
keying interface, it is better to connect it to the real com port. Cat 
control and ptt is not problem whether is connected. If you need rtty you 
will need a real com port for fsk.

73 Kostas sv1dpi


----- Original Message ----- 
From: "Byron Peebles" <NZ3O at arrl.net>
To: <dx4win at mailman.qth.net>
Sent: Thursday, March 17, 2011 5:29 AM
Subject: [Dx4win] DX4Win and USB Ports


> It's time to update a ten year old shack,
> and the new computer has one real serial port
> and the rest are USB (serial bus) ports.
>
> So, I want to connect my TenTec Orion II to this.
>
> Are there any tricks to doing CAT Radio Control, CW keying
> or the TenTec USB-sound-card interface through USB?
>
> How do I map the COM ports listed in DX4WIN to USB?
>
> Thanks!
>
> 73, Byron
>
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>