[Dx4win] Importing ADIF files from N3FJP

[David, K2DBK]

According to the ADIF spec (http://www.adif.org/adif227.htm#Mode%20Enumeration ) 
"PH" is not a valid mode, it should have been SSB. I'm at work and don't have 
D4W on this machine and I don't remember if there's a bulk QSO operation to 
change mode.

If not, using a text editor you can replace the PH mode with SSB and that should 
do the trick. (Hopefully you didn't save the log with the bad imports, but if 
you did, you can allow them to replace the others.)

If you're not familiar with editing an ADIF file, you need to use something like 
Notepad (don't use MS Word). Look for something that looks like this:

<MODE:2>PH

and have the editor replace all instances with

<MODE:3>SSB

Then you should be able to import without any problems.



On 6/30/2011 10:55 AM, N7KA at comcast.net wrote:
>
> I am having a problem importing ADIF files created by N3FJP.  When importing the ADIF files created by N3FJP logging software, the import process is changing the mode from SSB to CW and including this statement in the Notes for this QSO field: Import:{Mode=PH}
>
>
> Has anyone seen this previously?  Is this a N3FJP or DX3WIN problem.  I am looking at having to make 621 changes manually.  N1MM ADIF files import correctly.
>
>   
>
> Some stations on FD used N3FJP.  I tried N3FJP contests programs a few years ago but have not used them for several years due to problems N3FJP would not address. 
>
>
> Arne N7KA
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-- 
	David, K2DBK
	http://k2dbk.blogspot.com
	http://k2dbk.com
	Twitter: @k2dbk