[Dx4win] Lost Stay-Alive

[Kostas Stamatis]

You should select "Local" for connecting via ve7cc program. Selecting ve7cc 
you connect to ve7cc node direct from dx4win.
73 Kostas SV1DPI

----- Original Message ----- 
From: "Garry Shapiro" <garry at ni6t.com>
To: "DX4WIN Reflector" <dx4win at mailman.qth.net>
Sent: Friday, July 08, 2011 5:19 AM
Subject: [Dx4win] Lost Stay-Alive


>I very recently installed the updates to the DX4WIN.xx files, such as
> .awd, .mas2, etc and noted that dx4win.tcp had been updated--my
> preferred telnet selectio (ve7cc-1) was no longer at the top of the
> list, until I logged in with it. I then noticed, after logging in to
> VE7CC-1 with CCUser, Stay Alive appeared to have gone dysfunctional. The
> VE7CC cluster now disconnects me after a very short period of
> inactivity.  Finally, I noticed that, in logging into VE7CC, it now
> required my callsign, whereas previously it knew my callsign and took me
> directly to the command prompt.
>
> What happened, and how do I restore the previous condition of almost
> unbroken connection to the Cluster?
>
> I am using DX4WIN 8.04 and CCuser 2.9371.
>
> Garry, NI6T
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>