[Dx4win] CW Keyboard

[Kostas Stamatis]

Unfortunately i think you can not use the same port.
As i remember i had this problem with a home made interface for my mark-v 
whre only pins 2,3 and 5 used for radio control. So i used pin4 for dtr cw 
and pin 7 for rts ptt. You must have separate ports in dx4win. Maybe Paul 
can do it easily in a future update. I don't use this inerface anymore but i 
believe many of us stii use something like this.
73 Kostas SV1DPI

----- Original Message ----- 
From: "David M. Monfried" <dmonfried at comcast.net>
To: <Dx4win at mailman.qth.net>
Sent: Wednesday, January 26, 2011 7:47 PM
Subject: [Dx4win] CW Keyboard


> Not to answer my own question, but my uninstalling and reinstalling DX4WIN
> 8.04, I am now able to see the CW keyboard. My thanks to all who replied
> suggesting it was likely hidden somewhere.
>
>
>
> Now if I could only get it to work: I'm using the same comm port as 
> controls
> the radio, have tried every possible combination of DTR and RTS lines, set
> PTT delay to 5, but still cannot key the rig through the keyboard. So, 
> once
> again, I would very much appreciate suggestions.
>
>
>
> Thanks!
>
>
>
> Dave, W2PK
>
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>