[Dx4win] DX4WIN TCP file and VE7CC AR User software Isn't working

[Tom Carrubba KA2D]

Hello Karl

To try an answer your question, here is what I do...
Running P4, XP PRO, DX4WIN 7.05, VE7CC AR User

Open VE7CC AR User
configure
ports/logging program
check [telnet]
logging program connection
check [enable telnet]
check [user port 7300]
hit apply
restart VE7CC AR User
start DX4WIN
telnet VE7CC CC-Cluster>local-TCP,127.0.0.1:7300

This should get you going.

73 -Tom KA2D

----- Original Message ----- 
From: "Karl Oyster" <k1ko at cox.net>
To: <Dx4win at mailman.qth.net>
Sent: Monday, January 17, 2011 1:39 PM
Subject: [Dx4win] DX4WIN TCP file and VE7CC AR User software Isn't working


> Good afternoon,
>
> I am trying to use the VE7CC AR User program with the TCP file in DX4WIN.
> For some reason, although the following line
>
>
> VE7CC CC-Cluster>local-TCP,127.0.0.1:7300
>
> is in the TCP file, for some reason I don't understand, when I try to
> connect using it, nothing happens.  Nothing.  It is as if I had done 
> nothing
> to try to connect.  I have a sneaking feeling that the TCP entry may not 
> be
> correct, but I can't figure out, if that is the case, what's wrong with 
> it.
>
> Any help will be greatly appreciated.
>
> 73 to all
>
> Karl, K1KO
> Virginia Beach,VA
>
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html