[Dx4win] 30M spots jump to USB when clicked

[Mel]

Changing the CW cutoff is correct. You should have left the rig file 
alone. Just replace it with a back-up copy.

On 2011-01-16 11:59, Loren Hunt wrote:
> Well, I blindly followed some advise. I think some good some not good.
>
> This was set wrong for 30M so I changed it:
> "Also, be sure that CW Frequency cutoff is accordingly for 30 meters and
> all
>   other bands. This is located at FILE|PREFERENCE|QSO.  "
>
> Unfortunately I also did this:
> "Just go to FILE|DATABASES|RADIOS|YAESU
> FT1000MP|VALUES|MODEVALUES|CW|READ:2|WRITE:3|FILE|SAVE
>   CHANGES AND EXIT."
>
> Now when I double click on a spot the log field is correct but the radio doesn't change. So I have broke the link for setting frequency on the rig. I did not right the values down before changing them (what was I thinking). There are 4 fields
> Read 2, 255 and Write 3,255 in the CW field. Now the odd part is, this is all I changed and now I no spots move the dial on the rig. I didn't mess with anything in SSB and yet double click a SSB spot and no change at the rig.
>
> Again,
> 8.04
> FT1000MP.
>
> Thanks for help.
> AD6ZJ, Loren
>
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>