[Dx4win] Another Question

[ON4AOI]

William

In preferences under RTTY tab - Type should be none
And last line MMTTY needs to be pointing where mmtty.exe is located
And what is your rig? I ask this because for my Icom I don´t need the extfsk

Guy ON4AOI

> -----Oorspronkelijk bericht-----
> Van: William Osborne [mailto:wosborne44 at gmail.com]
> Verzonden: dinsdag 11 januari 2011 14:55
> Aan: 'ON4AOI'
> Onderwerp: RE: [Dx4win] Another Question
> 
> Guy thanks for helping. Here are the answers:
> 
> Do you have the extfsk.dll in your mmtty directory?   YES
> 
> If yes when you start mmtty alone does the small window appear?  YES
> 
> If yes is the correct comport, output pin for ptt and fsk selected?
> YES
> 
> MMTTY starts under DX4WIN but the small screen is not there and on TX
> screen
> using TXD to send is grayed out?
> 
> 
> Thanks
> Bill
> 
> -----Original Message-----
> From: ON4AOI [mailto:on4aoi at skynet.be]
> Sent: Tuesday, January 11, 2011 2:00 AM
> To: 'William Osborne'
> Cc: dx4win at mailman.qth.net
> Subject: RE: [Dx4win] Another Question
> 
> Hi William,
> Do you have the extfsk.dll in your mmtty directory?
> If yes when you start mmtty alone does the small window appear?
> If yes is the correct comport, output pin for ptt and fsk selected?
> 
> If the above is all true then close mmty and start dx4win
> Look in preferences if the correct path for mmtty is filled in
> When you start mmtty the small screen from the extfsk comport should
> also appear now and having a green spot to say tell you all is ok
> 
> Guy ON4AOI
> 
> 
> > -----Oorspronkelijk bericht-----
> > Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
> > bounces at mailman.qth.net] Namens William Osborne
> > Verzonden: dinsdag 11 januari 2011 0:24
> > Aan: dx4win at mailman.qth.net
> > Onderwerp: [Dx4win] Another Question
> >
> > Does anyone have any experience with MMTTY using FSK, Win 7 and
> DX4WIN?
> > I
> >
> >  get MMTTY to work alone but I cannot get EXTFSK to start with MMTTY
> >
> >  under DX4WIN so no FSK transmit; receiver is OK.
> >
> >
> >
> > Yes, I just upgraded and I am trying to get everything working again.
> > Thanks
> > for your help and patience.
> >
> >
> >
> > William Osborne, K5ZQ
> >
> > wosborne44 at gmail.com
> >
> > 618 967 0252
> >
> >
> >
> > ______________________________________________________________
> > Dx4win mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Dx4win at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html