[Dx4win] CW cut off frequency

[Jay Hainline]

Like I said in a previous post, make the default mode user selectable. You 
could make it cw or ssb to suit your needs if you don’t want a digital mode 
for those bands. Or shift the 2nd cutoff frequency to be the same as the 
first to eliminate the "digital" sub band.

Jay

-----Original Message----- 
From: Mel
Sent: Thursday, February 17, 2011 04:24
To: Jay Hainline
Cc: dx4win at mailman.qth.net
Subject: Re: [Dx4win] CW cut off frequency

I realize that Jay... but what about 40M... where is the "digital
cutoff" 7035? 7070?  On 160 digital is below CW. And for those not in
the USA a spot on the low end of 40 could be just about anything. Even
for digital modes some modern radios need to select different modes for
RTTY, PSK and other digital modes. I suppose an additional cutoff might
help on 20M but I'm suggesting that if we are ever going to fix this
properly we need to campaign for changes to DXCluster standards.

On 2011-02-16 07:01, Jay Hainline wrote:
> My comment was not just about 30 meters. It was for all the bands in 
> general
> that I would like to see an extra cut off frequency inserted.
> It would be another tool to help in the logging process. That’s all.
>
> Jay Hainline KA9CFD
> Colchester, IL EN40om
>
>
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

Jay Hainline KA9CFD
Colchester, IL EN40om