[Dx4win] Radio Control issues

[N0KK,Kirk]

no I have not made any changes to any files.

On 2/4/2011 6:38 PM, Bud Semon N7CW wrote:
> Kirk,
>
> Have you ever made any changes to the rig control files?  I changed the baud
> rate in the rig control file (in 8.04) and when I updated to 8.05, I didn't
> copy the new rig control file, so the radio didn't work.  Good luck.
>
> 73,  Bud  N7CW
>
>
> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
> On Behalf Of N0KK,Kirk
> Sent: Friday, February 04, 2011 5:29 PM
> To: dx4win at mailman.qth.net
> Subject: [Dx4win] Radio Control issues
>
> I upgrade to 8.04  I also switched PC's.
>
> Pulled all ini files etc to new PC all is working well...rotor controls,
> internet etc. Where I'm running into conflict is in the radio control.
>
> Let me preface this by saying the rig control is working as it should in
> all other programs I use. Writelog, MMTTY..etc
>
> What is happening is this...WHILE I tune the radios frequency knob...The
> cursor blinks and freq reads as it should. If I STOP tuning..cursor
> stops blinking and radio times out.
>
> I made NO changes to the rig settings and as a stated I used the ini
> file from my other pc.
>
> Anyone with some thoughts?
>
> Kirk
>
>
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>