[Dx4win] QRZ Error : Database not found

[JE2UFF]

(2011/12/02 3:50), John Shaw wrote:

Hi all

Thanks information. I just received mails, however I will go to job 
preparation start. So I'll return to home that try to change dir.

After information again. Thank you all.

> To run QRZ on your HDD it needs to be in a folder on the root DIR C:\ of the
> HDD in my case the folder is C:\callbk.   Then the setup in DX4WIN looks
> like this.
>
>
>
>
> Hope that helps.
>
> 73 John ZL1BYZ.
>
>
>
> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
> On Behalf Of Toshimi Horie
> Sent: Thursday, 1 December 2011 13:05
> To: dx4win at mailman.qth.net
> Subject: [Dx4win] QRZ Error : Database not found
>
> Hi all. I am JE2UFF.
>
> I checked archives this ref. Since it dose not solve, I would like to ask
> you. A problem is QRZ Error : Is is Database not found. Now I used QRZ
> Database install to HDD drive.
> It can used stand alone, no problem. However, I can used it with dx4win that
> problem happen.
> I set up EXT Data tab for install drive. But not found. If choose CD-ROM
> drive that no problem. I can used it with dx4win.
>
> Why can not used HDD drive.
>
> I tried two kind of types.
> C:¥Program Files(86)¥QRZ Ham Radio¥callbk C:¥Program Files(86)¥QRZ Ham
> Radio¥callbk¥
>
> Each path as same as QRZ Error.
>
> Please advice for me.
>
> My condition as follows
>
> Windws7 64bit
>
> Best regards
>
> de JE2UFF
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>