[Dx4win] MMTTY & DX4WIN help needed

[Antonio Galiana]

Hi.
Many thanks to everyone who helped me to solve this problem.

>From the begining I have followed the steps of MK2R+ and DX4WIN 8 setup
guide.
I spent my free time during one week going through the guide step by step,
repeatedly.

Guy suggested that I had installed the software twice. So I decided to:
- uninstall MTTY and delete the folder
- shut down the computer and run it again
- install latest version of the program (1.68A) from MM Hamsoft (THANKS!)
- Follow again step by step Kostas setup guide

...and finally, it works!
What happened?  Don't know, age does not forgive.

Again, big thanks to you guys, you are wonderful.

73 and QRV
Tony EA5BY


2011/4/22 Antonio Galiana <ea5by.tony at gmail.com>

> Hello Group.
> I Need some advice please:
>
> Here I have instaled DX4WIN 8.05 into a new computer running Windows XP.
> As hardware I have a Microham MK2R+ and FT1000D
> MK2R+ is conneceted via USB.
>
> If I run MMTTY as an standalone program all works fine, in the FT1000D I
> use RTTY/LSB and I can work RTTY perfectly.
>
> Through DX4WIN all goes fine except RTTY. RX is ok, but when I want to send
> RTTY the transceiver goes into TX but just a continuous carrier. Nothing
> else. (RTTY/LSB selected)
> If I choose PKT/LSB I can both RX & TX without problem but then when real
> time logging, PACK mode appears in DX4 logging window.
>
> One thing that it could be important (??) is that when DX4WIN is running
> and I go to the "RTTY Control panel" window > SETUP (O), in the MMTTY "MISC"
> tab, into the TX-PORT box, only "Sound" is marked, others are greyed out.
> But running MMTTY as standalone, the TX-PORT Box shows "COM-TxD(FSK) and USB
> port "Limited Speed".
>
> Any idea?  This issue is driving me crazy...
>
>
> --
> *73 de Tony*
> *EA5BY
> Skype: ea5by.tony
>
> *
>
>