[Dx4win] MMTTY & DX4WIN help needed

[Dick Flanagan]

The MMTTY reflector http://groups.yahoo.com/group/MMTTY/ contains a 
wealth of information and is full of very helpful people.  If you 
can't find a solution here, that would be a highly-recommended source of help.

Dick

At 04:39 AM 4/22/2011, Antonio Galiana wrote:
 >Hello Group.
 >I Need some advice please:
 >
 >Here I have instaled DX4WIN 8.05 into a new computer running Windows XP.
 >As hardware I have a Microham MK2R+ and FT1000D
 >MK2R+ is conneceted via USB.
 >
 >If I run MMTTY as an standalone program all works fine, in the FT1000D I use
 >RTTY/LSB and I can work RTTY perfectly.
 >
 >Through DX4WIN all goes fine except RTTY. RX is ok, but when I want to send
 >RTTY the transceiver goes into TX but just a continuous carrier. Nothing
 >else. (RTTY/LSB selected)
 >If I choose PKT/LSB I can both RX & TX without problem but then when real
 >time logging, PACK mode appears in DX4 logging window.
 >
 >One thing that it could be important (??) is that when DX4WIN is running and
 >I go to the "RTTY Control panel" window > SETUP (O), in the MMTTY "MISC"
 >tab, into the TX-PORT box, only "Sound" is marked, others are greyed out.
 >But running MMTTY as standalone, the TX-PORT Box shows "COM-TxD(FSK) and USB
 >port "Limited Speed".
 >
 >Any idea?  This issue is driving me crazy...
 >
 >
 >--
 >*73 de Tony*
 >*EA5BY
 >Skype: ea5by.tony
 >
 >*
 >______________________________________________________________
 >Dx4win mailing list
 >Home: http://mailman.qth.net/mailman/listinfo/dx4win
 >Help: http://mailman.qth.net/mmfaq.htm
 >Post: mailto:Dx4win at mailman.qth.net
 >
 >This list hosted by: http://www.qsl.net
 >Please help support this email list: http://www.qsl.net/donate.html
--
Dick Flanagan K7VC
dick at k7vc.com