[Dx4win] dx4win and FT5000

[on4iq]

rig file is latest made by on4aoi (as you know Guy)


i doubt rig file has anything to do with the fact that soft read freq/mode of last received dxspot


  ----- Original Message ----- 
  From: ON4AOI 
  To: 'on4iq' 
  Cc: dx4win at mailman.qth.net 
  Sent: Friday, April 01, 2011 1:10 PM
  Subject: RE: dx4win and FT5000


  First tell us what RIGFILE you use ? probably an old one for the ft2000 or ft9000, 

  In dx4w805 is a new rigdriver for the FT5000, dated 2 januari 2011 so why stay on dx4w804 ?

   

   

  Guy ON4AOI

   

  Van: on4iq [mailto:on4iq at telenet.be] 
  Verzonden: vrijdag 1 april 2011 12:32
  Aan: dx4win at mailman.qth.net; on4aoi at skynet.be; support at dx4win.com
  Onderwerp: dx4win and FT5000

   

  I recently connected the FT5000 to the PC with dx4win as logging software.

   

  Following strange behaviour has been noticed:

   

  When operating in CW (any band) the logging software reads the mode as ssb, or psk31 when the rig is in TX.

  I doubt that it is a RFI problem as it occurs on any band, any power level. even with only the ptt closed (that is 0 watts out)

  All the rs232 are shielded.

   

  The freq (khz) in the main dx4win , disappears aswell

  Occassionally the is 0.00 in it, giving an error when logging.

   

  Has anyone similar observations?

   

  73

  Johan