[Dx4win] Error messages

[Jo, YC0LOW]

Hi Kostas and Dave,
Many thanks for your responses.

Dave, it happened only in the middle of the usage i.e: when the
programme is running. Booting up process is always going fine.
I never had problems whatsoever when using the software in my older
laptop which its OS was Windows XP.
Tnx es 73 de Jo, YC0LOW

On Wed, Sep 15, 2010 at 9:50 PM, Dave Sharred <g3nkc at yahoo.co.uk> wrote:
> To be clear in Jo's initial email; are you talking about start up of DX4Win or when the program is running?
>
> If you are talking at start up; I have seen the same sort of behaviour on 2 PC's (Win XP and WIN7).
>
> IN the past (XP, older PC, earlier DX4Win) I also concluded that the driver was not installed correctly on a newly booted PC.
>
> I still see this sometimes on my new WIN 7 laptop.  I will install the driver at start up, which I think will provide the answer; later today.
>
> (BTW - I am using MicroHam USBII as my rig interface)
>
> 73
>
> Dave
> G3NKC
>
>
> --- On Wed, 15/9/10, Kostas Stamatis <sv1dpi at otenet.gr> wrote:
>
>
> From: Kostas Stamatis <sv1dpi at otenet.gr>
> Subject: Re: [Dx4win] Error messages
> To: "REFLECTOR dx4win" <dx4win at mailman.qth.net>
> Date: Wednesday, 15 September, 2010, 15:40
>
>
> I also have noticed this but occasionally. I believe that usb to serial
> driver is not loaded so quickly because our computer are not so fast. If you
> wait for a while or open another program first, there will not be a problem.
> 73 Kostas sv1dpi
>
> ----- Original Message -----
> From: "Jo, YC0LOW" <yc0low at gmail.com>
> To: <Dx4win at mailman.qth.net>
> Sent: Wednesday, September 15, 2010 2:19 PM
> Subject: [Dx4win] Error messages
>
>
>> When keying CW, I sometimes had consecutive two error mesages as follows:
>>
>> a. Could not open COM8 for keying:ie_Open - device already open.
>> and then:
>> b. Radio time out. Radio interface has been disabled
>>
>> To restore it, I must re-open the software in my notebook. I am using
>> ver 8.04 with Windows 7 as the OS.
>> I used a homemade interface made of two pcs of transistors 2N2222 and
>> two resistors 1.2k to my Icom 746Pro with cable USB 2.0 to serial that
>> has FTDI chipset.
>>
>> Could someone help me to explain what would be the cause, please?
>> Tnx es 73 de Jo, YC0LOW
>> ______________________________________________________________
>> Dx4win mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Dx4win at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>