[Dx4win] Error messages

[Kostas Stamatis]

I also have noticed this but occasionally. I believe that usb to serial 
driver is not loaded so quickly because our computer are not so fast. If you 
wait for a while or open another program first, there will not be a problem.
73 Kostas sv1dpi

----- Original Message ----- 
From: "Jo, YC0LOW" <yc0low at gmail.com>
To: <Dx4win at mailman.qth.net>
Sent: Wednesday, September 15, 2010 2:19 PM
Subject: [Dx4win] Error messages


> When keying CW, I sometimes had consecutive two error mesages as follows:
>
> a. Could not open COM8 for keying:ie_Open - device already open.
> and then:
> b. Radio time out. Radio interface has been disabled
>
> To restore it, I must re-open the software in my notebook. I am using
> ver 8.04 with Windows 7 as the OS.
> I used a homemade interface made of two pcs of transistors 2N2222 and
> two resistors 1.2k to my Icom 746Pro with cable USB 2.0 to serial that
> has FTDI chipset.
>
> Could someone help me to explain what would be the cause, please?
> Tnx es 73 de Jo, YC0LOW
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>