[Dx4win] Spotting Question

[Mel]

No, the country should have been determined correctly, but the mode may 
not have been.

An ongoing problem is the spotting network does not require a mode 
(overdue given 99% of spots are probably generated by software) and it 
has to be guessed at by frequency. This is what the CW cutoff is used 
for in DX4Win setup. Forty meters is one band where the division between 
CW/Digital/SSB is uncertain. Possibly the spot was not recognized as CW. 
Was it above your "CW cutoff frequency"?

On 2010-10-08 21:17, Mark K3MSB wrote:
> I just worked MJ/DL2SBY on 40 CW.   This is a new band country for me.
>
> The call showed up in the Packet Window,  but was not highlighted in the DX
> Spots window.
>
> I have no entries in "Prefix/Zones for Spotters".   Other stations are
> getting highlighted as I expect them.
>
> Is there an issue with stations that use their portable prefix before their
> actual call?   Stations that use the portable prefix after their actual seem
> to be spotted as expected.
>
> Thanks
>
> Mark K3MSB
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>