[Dx4win] rx frequency in note for this qso field

[Jim Reisert AD1C]

It sounds like N1MM exports both the FREQ and FREQ_RX fields, even when 
the QSO is simplex (i.e. the latter is not needed).

You would have to go into the ADIF file, find all the FREQ_RX fields 
(both name and value) and completely delete them.  May not be so easy.

I'll see if I can add this to "ADIF to DXQ" before the next release. 
Please send me your .ADIF file to test with.

73 - Jim AD1C

On 5/2/2010 3:42 PM, Mel SM0MPV wrote:

> Greetings to you all,
>
> When I import an ADIF file from N1MM after a contes, I always get the
> frequency in it's field but also rx frequency in the "note for this qso"
> field. Is it possible to remove this note in all QSOs in a simple maner?
>
> Sometimes I work without the computor connected to the rig. N1MM always keep
> track of the frequency and needs to have one to work. The frequency will be
> imported together wit the rest of the information. Is it possible to import
> QSOs from N1MM and omitt the frequency in the import?
>
> Best regards
> Mel - SM0MPV
> 8S0C contest call

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us