[Dx4win] Import Abort - Duplicate QSO's

[ON4AOI]

Correct Jim,
Antenna has to be in 1 grid only
Guy

> -----Oorspronkelijk bericht-----
> Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
> bounces at mailman.qth.net] Namens Jim Reisert AD1C
> Verzonden: zondag 2 mei 2010 19:04
> Aan: Mel
> CC: Art - W6KY; DX4WIN Reflector
> Onderwerp: Re: [Dx4win] Import Abort - Duplicate QSO's
> 
> On Sun, May 2, 2010 at 10:42 AM, Mel <ve2dc at videotron.ca> wrote:
> 
> > Should also check grid... perhaps Paul could fix this.
> 
> I'm not sure that "grid lines" count for VUCC.  I think you have to be
> INSIDE the grid.  I've never heard of a rover operating from a line,
> but I could be wrong (it wouldn't be the first time).
> 
> 73 - Jim AD1C
> 
> > Jim Reisert AD1C wrote:
> >>
> >> This "duping" problem was fixed in 8.03 (from the release notes):
> >>
> >> Import/Export
> >>
> >> · Include state/county when checking for duplicate QSOs
> >>
> >> Can you please download/install 8.03 and see if the problem goes
> away?
> >>  You can install it into its own directory and it won't affect your
> >> 8.01 setup.
> >>
> >> On Sun, May 2, 2010 at 9:22 AM, Art - W6KY <w6ky at yahoo.com> wrote:
> >>
> >>> Hi Jim,
> >>>
> >>> Logged as 2 QSO's. But with different reports representing the
> county's.
> >>> K7ZX sitting on the county line...
> >>>
> >>> Using 8.01.. Did the County conversion program. Same results.
> >>>
> >>> Never had this happen before because in a contest when I am in a
> run
> >>> mode I always work dupes. Contest software counts them as zero so
> >>> it doesn't matter. Never dupe in S&P. N1MM software.
> >>>
> >>> This contest I only worked abt 100 Q's so I can easily remove the 6
> >>> or 8 county line dupes, but in a major contest... I really don't
> see the
> >>> need to 'abort' an import due to dupes. Maybe a yes or no to
> proceed
> >>> but not abort...
> >>>
> >>> 73, Art  W6KY
> >>>
> >>>
> >>>
> >>>
> >>> ----- Original Message ----
> >>> From: Jim Reisert AD1C <jjreisert at alum.mit.edu>
> >>> To: Art - W6KY <W6KY at yahoo.com>
> >>> Cc: DX4WIN Reflector <dx4win at mailman.qth.net>
> >>> Sent: Sun, May 2, 2010 7:18:54 AM
> >>> Subject: Re: [Dx4win] Import Abort - Duplicate QSO's
> >>>
> >>> Hi Art,
> >>>
> >>> How did you log the call and QTH?  What version of DX4WIN are you
> using?
> >>>
> >>> If the QSOs are the same *except* for the County, I believe that
> >>> DX4WIN 8.0x will NOT think they are duplicates.
> >>>
> >>> Have you tried running this program on your log to convert the
> contest
> >>> abbreviations to real ADIF county names?
> >>>
> >>>  http://software.ad1c.us/ADIF_County/
> >>>
> >>> In fact, this program will create two QSOs out of the county line,
> and
> >>> will add 1 second to the second QSO.
> >>>
> >>> 73 - Jim AD1C
> >>>
> >>> On Sun, May 2, 2010 at 1:31 AM, Art - W6KY <w6ky at yahoo.com> wrote:
> >>>
> >>>> When importing the 7 Area QSO Party ADIF log
> >>>> the import aborts because of duplicate QSO's.
> >>>> But, I worked several stations on the county lines.
> >>>> Example:
> >>>> K7ZX was ORLAN and ORLNN
> >>>> Logged as 2 QSO's.
> >>>> I have about 6 stations with 2 QSO's each on the
> >>>> same band. County Lines...
> >>>> What to do...
> >>>>
> >>>> Could change the calls in the ADIF file and then change
> >>>> em back... Too much chance for errors...
> >>>>
> >>>> Thanks, Art  W6KY
> 
> 
> --
> Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html