[Dx4win] SO2R

[John Bostwick]

Howard,

Pin 14 of the LPT port that controls the switching.  Go to DX Doubler and 
look at the mod sheet for using with DX4WIN.  There is additional jumpers to 
facilitate DX4WIN.  Hope this helps

73,
John AC8E
----- Original Message ----- 
From: "Howard K2HK" <k2hk at arrl.net>
To: <sv1dpi at otenet.gr>; <ve2dc at videotron.ca>; <jjreisert at alum.mit.edu>; 
<bemeier at bellsouth.net>; "dx4win dx4" <dx4win at mailman.qth.net>
Sent: Wednesday, March 31, 2010 2:57 PM
Subject: Re: [Dx4win] SO2R


>
> Thanks guys for the responses. I should have noted I am using a DX 
> Doubler. I believe there may be an additional switching problem with pin 
> 14 on the LPT port for the second radio with the DXD. I have used DX4Win 
> for so long that I am reluctant to go another route for DX'ing and casual 
> operating but I undoubtedly will for contesting. I would like to hear 
> from anyone using Dx4win in a SO2R config.
> 73,
> Howard
>
> HK
>
>
>
>> From: sv1dpi at otenet.gr
>> To: dx4win at mailman.qth.net
>> Date: Wed, 31 Mar 2010 21:33:30 +0300
>> Subject: Re: [Dx4win] SO2R
>>
>> I want just to add that mk2r+ from microham does so2r with dx4win without 
>> an
>> lpt in case computer has not one. The bad news is that costs a lot...
>> Kostas SV1DPI
>>
>> ----- Original Message ----- 
>> From: "Mel" <ve2dc at videotron.ca>
>> To: <dx4win at mailman.qth.net>
>> Sent: Wednesday, March 31, 2010 2:05 PM
>> Subject: Re: [Dx4win] SO2R
>>
>>
>> > Ctrl-Shift F12 actually.
>> >
>> >
>> > You need to set up the interface for both radios and you can use a pin
>> > (pin 14 I think) on an LPT port to supply a signal to automate the
>> > switch between radios if you have the hardware. Set up is on the CW tb
>> > of "Preferences".
>> >
>> > Guy has some hardware that supports SO2R operation. www.on4aoi.be
>> >
>> > You can also find SO2R hardware at arraysolutions.com
>> >
>> > Jim Reisert AD1C wrote:
>> >> On Tue, Mar 30, 2010 at 8:56 PM, Howard K2HK <k2hk at arrl.net> wrote:
>> >>
>> >>> I would like to use DX4win for casual operating with 2 radios. After
>> >>> scanning the manual I can't come up with much for SO2R. Is there a
>> >>> section I am missing? At the very least what is the key combo to 
>> >>> switch
>> >>> radios once it is set up?
>> >>
>> >> Try "Radio" from the main menu, there is a key sequence to switch
>> >> between radios (I think it's F12 but I don't have a radio connected in
>> >> the home office, so I can't see the choices).  You can probably figure
>> >> out which section in the manual to find more details.
>> >>
>> >> 73 - Jim AD1C
>> >>
>> >
>> > ______________________________________________________________
>> > Dx4win mailing list
>> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> > Help: http://mailman.qth.net/mmfaq.htm
>> > Post: mailto:Dx4win at mailman.qth.net
>> >
>> > This list hosted by: http://www.qsl.net
>> > Please help support this email list: http://www.qsl.net/donate.html
>> >
>>
>> ______________________________________________________________
>> Dx4win mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Dx4win at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>