[Dx4win] Keying MMTTY

[Jim Reisert AD1C]

Bud, have you read the MMTTY application note:

    http://dx4win.ad1c.us/

If you have MMTTY working stand-alone, you're half-way there.  Make
sure the COM port you are using for PTT/FSK isn't being used by
anything else (check your preferences).

73 - Jim AD1C

On Fri, Jun 18, 2010 at 10:50 PM, Bud Governale, W3LL <w3ll at arrl.net> wrote:
> I'm trying to get DX4WIN to key MMTTY on my IC-7000.
> When clicking on a DX4WIN macro RTTY button, I can hear the tones playing but the Icom IC-7000 is not being keyed.
>
> I have the path to the MMTTY executable set in the DX4WIN RTTY preference window.
>
> I can open the MMTTY program and send RTTY FSK directly from MMTTY. This indicates that the two transistor FSK keying
> cable (PTT and FSK) is functioning properly thru its com port.
> If DX4WIN is open at the same time then the MMTTY program cannot open its com port. I have to close DX4WIN to use MMTTY
> as a stand alone program.
>
> I can send CW properly in DX4WIN thru the FSK keying cable com port.
> I don't understand why DX4WIN cannot key MMTTY.
>
> What am I doing wrong?
>
> 73,
>
> Bud W3LL
> w3ll at arrl.net

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us