[Dx4win] Unwanted spots

[Jim Reisert AD1C]

If you NEVER want to see spots for those bands, do what Erkki suggets
- filter them at the node.

I don't believe there is a way in DX4WIN to eliminate gray spots for
bands you have not selected.

BTW, DX4WIN 8.02 and 8.04 are the same in this area.

73 - Jim AD1C

On Sat, Jun 5, 2010 at 4:24 PM, Jim Simon <jhsimon at comcast.net> wrote:
> Kjell, thanks for the response. I had already done what you described -- I
> checked only the bands/modes I want to see in Packet3, but spots for all of
> the unchecked bands and modes are also appearing (in grey).
>
> If I recall correctly, in 8.02 I only saw grey spots for stations I had
> already worked in the same band/mode (in the bands/modes I had checked in
> Packet3), but since I upgraded to 8.04 yesterday, I'm seeing grey spots for
> all the bands/modes that I had not checked in Packet3.  The result is that
> most of the spots on the screen at any one time are unwanted spots, and the
> spots bands/modes I do want to see scroll off the screen too quickly.
>
> Any further thoughts? Thanks!
>
> 73,
> Jim W1YY/7
>
> --------------------------------------------------
> From: "Kjell W. Strom" <strom.lime at xs4all.nl>
> Sent: Saturday, June 05, 2010 11:36 AM
> To: "'Jim Simon'" <jhsimon at comcast.net>; "'DX4WIN'" <DX4WIN at mailman.qth.net>
> Subject: RE: [Dx4win] Unwanted spots
>
>> Jim,
>>
>> File>Preferences>Packet3 does it for you. .
>>
>> 73,
>> Kjell, PB3SM - SM6CPI


-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us