[Dx4win] A little help and advice please

[Jim Reisert AD1C]

Please see this post:

    http://lists.contesting.com/_writelog/2009-06/msg00081.html

It says:

"But for the IC-706 there are three models, each with its own hex code
as follows:

    IC-706 48h
    IC-706MKII 4Eh
    IC-706MKIIG 58h
"

The radio address (programmed into your ICOM) should have been 58h, it
sounds like the radio was re-programmed.  DX4WIN has only *ONE* hex
address code for the entire IC-706 line (48h), which sounds like it
could be improved.

73 - Jim AD1C

p.s. you can copy pskcore.dll from the 8.04 directory to the 7.06 directory

On Wed, Jul 21, 2010 at 11:59 AM, Andy Hewitt
<andyphewitt at btopenworld.com> wrote:

> Thank you for your reply. Unfortunately for some reason I can't open
> ver7.06, it says it can't find the psk.dll, it's  there OK in the DX4W
> directory but after I set up 8.04 it won't work.
>
> No problem anyhow.
>
> I opened the .INI file with notepad and there under radio are the settings,
> they may not get transferred but they are recorded. In the case of the
> IC706mk2g the baud rate should be 4800 (not 1200 as DX4W wants) and the
> address 4E (not 48 as the default in DX4 is, nor 50 as the notes for the
> radio in Preferences says). DTR and RTS are low and it's all working now.

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us