[Dx4win] Using PSK in Ver 8.03 - using K3 and microKEYER II

[ON4AOI]

Hi Doug,
Maybe an option is to disable the hardware from Modem #1 Line Record,
Or Delta AP 1/2 and Delta AP Monitor in your system settings and check
afterwards
If the microham codec is visual now in dx4win setup.

Guy ON4AOI

> -----Oorspronkelijk bericht-----
> Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
> bounces at mailman.qth.net] Namens Doug Joyce
> Verzonden: zaterdag 10 juli 2010 23:21
> Aan: DX4WIN Reflector
> Onderwerp: [Dx4win] Using PSK in Ver 8.03 - using K3 and microKEYER II
> 
> I'm having difficulty with using PSK from within DX4Win on one of my
> systems.  - Let me explain
> 
> PSK in System A works ok - both Rx and Tx (as does CW, RTTY-FSK and
> SSB).  System A is an FT-1000D with a microKEYER II (FW 4.6) running on
> a Dell Latitude D830 (Win XP SP3) - software is Router 7.7.0 and DX4Win
> Ver 8.03.
> 
> PSK in System B does NOT work - either Rx or Tx (although CW, RTTY FSK-
> D and SSB are ok).  System B is a K3 with microKEYER II (FW 4.6)
> running on a Dell Dimension 8300 (Win XP SP3) - software is Router
> 7.7.0 and DX4Win Ver 8.03.
> 
> Trouble shooting has identified one area that I think is causing the
> problem but don't know how to fix it.
> 
> When I go to Router=>options=>audio devices=>show list of audio devices
> - the MicroHam CODEC is listed in each of the three columns: Wave Out,
> Wave In and Mixer - for both Systems A & B.
> 
> In Wave Out, if I highlight the MicroHAM CODEC and click "Test", the
> "SC" light comes on, a tone is generated  and with each radio in USB
> mode, the PTT1 light comes on and RF is produced - for both Systems A &
> B.
> 
> However when I open DX4Win for each system and go to File =>
> Preferences => Control and look in the PSK Sound Card window,
> (a) for System A, the microHAM CODEC is listed as an option and has
> been chosen -
> (b) for System B, the microHAM CODEC is NOT listed as an option.  The
> box shows five other choices - default, SB Audigy 2 audio (CC40), Modem
> #1 Line Record, Delta AP 1/2 and Delta AP Monitor.  (The box is only
> big enough for 5 entries and I can't scroll down).
> 
> Assuming that not being able to choose the microHAM CODEC as the PSK
> sound card for System B is causing the problem, what do I need to do to
> have DX4Win recognize the microHAM CODEC?
> 
> Thoughts from anyone would be appreciated.
> 
> Thanks & 73
> 
> Doug Joyce,   VE3MV
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html