[Dx4win] 6M mode changeover ver 8.04

[ON4AOI]

Yes Larry this is possible
Go in preferences - QSO tab - change the band in the CW frequency Cutoff to 
6M and then change in the place below

Save changes and exit

Guy ON4AOI


> -----Oorspronkelijk bericht-----
> Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
> bounces at mailman.qth.net] Namens L Emery
> Verzonden: vrijdag 9 juli 2010 14:38
> Aan: dx4win at mailman.qth.net
> Onderwerp: [Dx4win] 6M mode changeover ver 8.04
> 
> Is it possible to set the 6M mode changover frequency ?  When clicking
> on a 6M spot the DX4Win logging window, and thus the Elecraft K3 Mode,
> will automatically revert to SSB mode on any frequency from 50.100 and
> up.  Is it possible to set this frequency to crossover from CW to SSB
> in the dx4win MODE window to around 50.120 mhz.
> 
> Larry  K1UO
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html