[Dx4win] CW keying issue?

[Yann]

Hello

I have also the same problem : locks on key down (cw via virtual serial
ports)
Equipement here :

Windows XP SP3
micro keyer II
Icom 7700

All work on 8.02 but not on 8.03
The solution for me, is use now winkey via micro keyer II and all work !

Best 73
HNY

Yann F5NBU
www.f5nbu.org



-----Message d'origine-----
De : dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
De la part de ON4AOI
Envoyé : lundi 4 janvier 2010 08:50
À : 'Ian Trusson'
Cc : dx4win at mailman.qth.net
Objet : Re: [Dx4win] CW keying issue?


Hi Ian,
The discussion did not end behind screen but the biggest problem
Is that we (Paul and myself) can not duplicate the problem.
Paul has tested on W7 and couldn´t reproduce the problem, CW and PTT are
working ok  
I have tested with real comports, microKEYERII with virtual ports and also
USB to serial(brand is Gembird)
on the following systems.
Vista home laptop (no real serials) with USB to Serial with FT920
(cat+cw+ptt) all ok
Vista Ultimate Quad PC (6 real serials, 3LPT ports, 10 virtual serial
ports(MKII) and 2 USB to Serial
Tested all possibilities out one by one and all is acting OK
EEEPC1000H XPHOME SP3 (no real serials) with USB to Serial to FT920
(cat+cw+ptt) all ok
Also tested with 10 virtual serial ports(MKII) to IC7800 and all is working
OK.

So I hope you understand that this is hard to find out what is going wrong
since Paul didn´t change anything to this part of the software, he only
added a protection
when the comport is not there or changed when the program is running to a
port that does not exist
     
GUY ON4AOI


> -----Oorspronkelijk bericht-----
> Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
> bounces at mailman.qth.net] Namens Ian Trusson
> Verzonden: maandag 4 januari 2010 3:17
> Aan: dx4win at mailman.qth.net
> Onderwerp: [Dx4win] CW keying issue?
> 
> I have been following the "CW Keying Issue" thread in the archive, but
> the
> thread seemed to come to an end on 28 Dec 2009 without a resolution.
> 
> I have the same problem here. I am using v8.03, Windows 7, USB to
> serial
> converter, COM1, PTT delay 1, DTR = CW keying, RTS = PTT. When I start
> a CW
> keyboard message the FT1000MP locks on key down.
> 
> Is there any more info on this problem?
> 
> 73, Ian G3RVM
> 
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html