[Dx4win] Starting and Stopping Radio

[Kostas Stamatis]

I suggest also to
file>preferences> Radio tab on the left of DTR and RTS there is a box says 
Max tries. Make this 1 to limit the time dx4win tries to find the radio. My 
Mark v works fine with 1 try, i don't need the default 3.
Kostas sv1dpi
----- Original Message ----- 
From: "Jim Reisert AD1C" <jjreisert at alum.mit.edu>
To: "Steve Thompson" <steve.n7tx at gmail.com>
Cc: "DX4WIN REFLECTOR" <dx4win at mailman.qth.net>
Sent: Wednesday, April 21, 2010 7:20 AM
Subject: Re: [Dx4win] Starting and Stopping Radio


> On 4/18/2010 1:41 PM, Steve Thompson wrote:
>
>> I've got DX4WIN (version 8.03) working with the Yaesu FT-1000D from its 
>> CAT
>> terminal to my PC's serial port.  When I am done operating and turn off 
>> the
>> radio, then DX4WIN locks up for a brief period - apparently it is looking
>> for the radio, can't find it, and then when it gives up, I get an error
>> message that says "Radio timed out, radio interface has been disabled". 
>> I
>> understand that issue, and figure that prior to powering off the radio, I
>> need to use DX4WIN's "Radio" menu to "Stop Radio".
>
> You don't need to stop the radio.  Just make sure you are not in "Add
> QSO" mode, by typing ESCape.  Your log should be at the last logged QSO.
>  I do this all the time, it works fine.
>
> 73 - Jim AD1C
>
> -- 
> Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>