[Dx4win] Ve&CC Cluster setup

[Rick Murphy]

On Sun, Sep 27, 2009 at 10:24 AM, Ron Polityka <wb3aal at verizon.net> wrote:
> Hello,
>
>  I guess the coffee just did not kick in enough today but I can not seem to
> get the latest DX4Win to work with my VE7CC DX Cluster connection.
>
> Any help would be appreciated.

Start VE7CC.
Go into the "Configuration" menu and pick "Ports/Logging Program". On
the Port Setup in the middle column, you'll see a box labeled "Logging
Program Connection". Make sure that "Enable Telnet" is checked, and
that "Use Port 7300" is checked.

In DX4WIN, Preferences/Packet 1. "COM Port" should read "TCP/IP".
Then, in the DX4WIN Packet window, right click and choose "Internet
Connection". Scroll down to the "LOCAL>CC User, localhost:7300" and
double click that. That should connect you up.
When you double click an entry, it becomes the default so in the
future you can connect by opening the packet window and hitting Enter
a few times.

Jim, shouldn't there be an app note for this? (Or is there one that I
missed?) It's a pretty frequent question.
73,
   -Rick
-- 
Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA