[Dx4win] New QRZ.com Online Interface

[ON4AOI]

Correct Jim, my mistake, cdrom was also setup

Guy ON4AOI

> -----Oorspronkelijk bericht-----
> Van: jjreisert at gmail.com [mailto:jjreisert at gmail.com] Namens Jim
> Reisert AD1C
> Verzonden: woensdag 2 september 2009 19:23
> Aan: ON4AOI
> CC: dx4win at mailman.qth.net
> Onderwerp: Re: [Dx4win] New QRZ.com Online Interface
> 
> The part that's not automatic is going out to the QRZ.COM web site.
> You must hit ENTER in the lookup window for each query you want to
> make to QRZ.COM.
> 
> This is the same way that DX4WIN 7 and earlier worked.
> 
> On Wed, Sep 2, 2009 at 11:18 AM, ON4AOI <on4aoi at skynet.be> wrote:
> 
> > It can be automatic for the next qso(´s) if you mark it.up
> > (right click in the window and select)
> >
> > Guy ON4AOI
> >
> >> -----Oorspronkelijk bericht-----
> >> Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
> >> bounces at mailman.qth.net] Namens Jim Reisert AD1C
> >> Verzonden: woensdag 2 september 2009 19:10
> >> Aan: DX4WIN Reflector
> >> Onderwerp: Re: [Dx4win] New QRZ.com Online Interface
> >>
> >> Once the F3 window pops up, type ENTER in that window to go to QRZ
> on
> >> the web.  It's not automatic.
> >>
> >> Look for "Address or QSL Manager search" in the help file.
> >>
> >> 73 - Jim AD1C
> 
> 
> 
> --
> Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us