[Dx4win] wish list for 8.02 or later

[ON4AOI]

Mike,
With a little hardware it is possible to have 2 rotators and other antennas
Connected to dx4win.
Let us assume that you have only 1 radio and identical rotators.

In preferences|radio tab|set the second radio equal to the first radio
In preferences|CW tab|set the RADIO 1/2 signal to lpt1-2 or 3 (reverse can
be set also) 
Save and exit 
Now you can switch from radio1 to radio2 with ctrl+shift+F12 even it is the
same radio
But when You do this PIN 14 of the selected LPT port is low (radio1) and
high (radio2)
If you connect a relay to pin14 you can switch the serialport from motor1 to
motor2
Also antennas can be switch via this way.

Guy ON4AOI 
 

> -----Oorspronkelijk bericht-----
> Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
> bounces at mailman.qth.net] Namens ???????? ??????
> Verzonden: dinsdag 1 september 2009 7:07
> Aan: Dx4win at mailman.qth.net
> Onderwerp: Re: [Dx4win] wish list for 8.02 or later
> 
>  Hi gang!
>  I still wonder why DX4WIN has only one port for antenna rotator
> control? I am very disappointed with this . Many of us have more as one
> tower/rotaror. I have 3 towers with Yaesu rotators but I can control
> only one. What to do with the rest?
> 
> Regards, Mike RL3BM
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html