[Dx4win] RX and TX frequency not appearing in Notes field?

[Kostas Stamatis]

My problem is not where the tx freq is stored and i agree that maybe is 
better freq field showing tx freq after the emails i read. I am talking 
mainly for bandmap. I just want to see which is the station in my rx 
frequency in bandmap. The way i am working is this. Every time i rotate the 
dial, I look the red arrow and i want to see beside of this the station is 
supposed to be there. Especially when the difference in split freq is big it 
is almost impossible to understand what is happening. Maybe i have used 
bandmap as it works in writelog.
73 Kostas

----- Original Message ----- 
From: "Thomas Herrmann" <DL1AMQ at web.de>
To: "Jim Reisert AD1C" <jjreisert at alum.mit.edu>; "Kostas Stamatis" 
<sv1dpi at otenet.gr>
Cc: "REFLECTOR dx4win" <dx4win at mailman.qth.net>
Sent: Tuesday, October 20, 2009 9:42 AM
Subject: Re: [Dx4win] RX and TX frequency not appearing in Notes field?


>I wish to have Contest Mode "ON" allways to get split frequency stored.
> In my case, I have to set it every time for new after starting the 
> programm.
> How to set it for fix (as I had it before) ?
>
> Thanks,
> 73 de Thomas, DL1AMQ
>
>
>> -----Ursprüngliche Nachricht-----
>> Von: "Jim Reisert AD1C" <jjreisert at alum.mit.edu>
>> Gesendet: 20.10.09 07:59:44
>> An: Kostas Stamatis <sv1dpi at otenet.gr>
>> CC: REFLECTOR dx4win <dx4win at mailman.qth.net>
>> Betreff: Re: [Dx4win] RX and TX frequency not appearing in Notes field?
>
>
>> On 10/19/2009 11:17 PM, Kostas Stamatis wrote:
>>
>> > PS. I would like to have the rx freq in freq field and tx in notes. I 
>> > think
>> > it is not right what is happening. As a result of this you can find a
>> > station in his qsx freq in bandmap and not where it should be (in his 
>> > rx
>> > freq where i can hear him)
>>
>> Tx FREQ is what your country's licensing organization cares about (to
>> see if you were transmitting out-of-band), therefore, it should always
>> be in the FREQ field.  The ADIF spec is also clear, there is a FREQ
>> field which is used for Rx/Tx freq if simplex, and Tx freq if split
>> (FREQ_RX is for the Rx VFO).
>>
>> Kenwood/Yaesu/ICOM radios all behave differently with respect to what
>> frequency shows up in the band map (it depends on what the radio reports
>> as the "active" VFO).  This is a separate issue from what gets recorded
>> in the FREQ field.
>>
>> 73 - Jim AD1C
>> ______________________________________________________________
>> Dx4win mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Dx4win at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
>
> ______________________________________________________
> GRATIS für alle WEB.DE-Nutzer: Die maxdome Movie-FLAT!
> Jetzt freischalten unter http://movieflat.web.de
>
>
>