[Dx4win] 3 DIGIT SSB

[k4pi]

  HI  Gary,  You would think that would be the case but doing this has no effect on the mode/bands in the log entry.  I have had several versions over many years and they are all the same.  I edit the bands and modes in Preferences but they all still show up in the log entry.  Several friends have the same problem.  I am not sure what setting up the station band/mode preferences does as it has no effect on the log entry selections.  If yours does work several of us have something wrong.  Let me know.  I am now running version 8.02  
  73 Mike K4PI
   
  You can set up DX4WIN to exclude bands (and modes) you do not use. File/Setup Parmeters/Station Ditto for the major operating awards.

  k4pi wrote: 
I agree with the post by Vigis LY2CX about the problem with the 3 digit RST 
SSB option.  Could there possibly be a selection to allow setting SSB for 2 
or 3 digit in Preferences?   I enter a lot of Q's from paper and it is a 
breeze with CW QSO's but a snag on SSB.

While I am on my soapbox I may as well mention the thorn in my side in 
having to go through all the bands I don't use to get to the one I need.  7 
steps to get to 160 M.  Using the mouse to slide to it is a distraction. If 
a 2 nd digit could be recognized then it would only take 2 steps. ie 16 to 
get 160, 12 go straight to 12 etc.

73 Mike K4PI 

______________________________________________________________
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

  

------------------------------------------------------------------------------



  No virus found in this incoming message.
  Checked by AVG - www.avg.com 
  Version: 8.5.422 / Virus Database: 270.14.21/2445 - Release Date: 10/19/09 06:40:00