[Dx4win] Headings

[ON4AOI]

Hi Jim,
If you have your rotator controlled by dx4win its easy to setup.
Under rotator you have the tab Parameters where you can setup for each band
An offset and also a correction for the selected band.

Guy ON4AOI   

> -----Oorspronkelijk bericht-----
> Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
> bounces at mailman.qth.net] Namens Jim Reisert AD1C
> Verzonden: zaterdag 17 oktober 2009 19:27
> Aan: DX4WIN Reflector
> Onderwerp: Re: [Dx4win] Headings
> 
> DX4WIN beam headings are referenced to the geographic North Pole - 90
> degrees North Latitude.  There is no way for DX4WIN to know the heading
> to magnetic north from your particular QTH.  I am not aware of ANY
> program that can do this.
> 
> What DX4WIN should have, and I can't find it at the moment, is a way to
> program an offset into the rotator control.  Then if your antennas were
> aligned to magnetic North, DX4WIN could compensate for this. Maybe Guy
> ON4AOI knows if such a feature exists.
> 
> 73 - Jim AD1C
> 
> --
> Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html