[Dx4win] rstS_rstR field entry when SSB

[Jim Reisert AD1C]

It has been this way in DX4WIN for some time.  There are many cases 
where you need to enter a 3-digit RST for SSB contacts, i.e.:

Aurora:  57A

73 - Jim AD1C

On 10/17/2009 7:41 AM, LY2CX wrote:

> Lost a good feature in the v 8.02.
>
> In the old version V1.2, when use Real-time ( F9) or Off-time entry and
> SSB mode - rstS and rstR fields set to
> two digit (59)
> After entry in the field rstS two digits (e.g. 59) the cursor jumps
> to the next field rstR - this was in the old 1.2 version.
>
> In the new one (8.02) when use Real-time ( F9) or Off-time entry and SSB
> mode
> rstS and rstR set also to two digit, BUT,
> after enter to the field rstS two digits (e.g. 59) the cursor
> stays here and I need to use TAB key to get in the next field as well
> as to get out of the rstR.
> And this is needed to repeat with every logged QSO. It slows down
> logging.
>
> This Tab key is not needed when CW, but when SSB.
>
> Is this the way for ever, or some settings can help to solve this ?
>
> Regards,
> Vigis,  LY2CX


-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us