[Dx4win] Filter settings reversed

[Jim Reisert AD1C]

Roger N1RJ wrote:

> Mine does it too as well as putting the split freq in the freq
> window. I discovered that the rig file without the X4 works OK.

Then added:

> I just discovered that the K# file without X4 seems to set freqs and
> bandwidth OK but doesn't set the split to on.

Here are the differences between the two .RIG files (use a fixed-width
font).  Maybe someone can figure out how to get the best of both
worlds:

MODEL=Elecraft K3                    |  MODEL=Elecraft K3 X4
DATE=39734                           |  DATE=39735
[RC-Clear Clarifier]                 <
CSTR=RC;                             <
CDELAY=0                             <
LEN=0                                <
LOC=Other                            <
                                     <
CSTR=FR0;FT0;                        |  CSTR=FT1;
                                     >  [RC-Select VFO B]
                                     >  CSTR=K31;SWH58;SWT13;SWT13;K30;
                                     >  CDELAY=520
                                     >  LEN=0
                                     >  LOC=VFO A&B
                                     >
CSTR=MD0;                            |  CSTR=MD0;FT0;FR0;
CSTR=FR0;                            |  CSTR=;
[RC-Set Split on]                    <
CSTR=FT1;                            <
CDELAY=0                             <
LEN=0                                <
LOC=VFO A&B                          <
                                     <
CDELAY=0                             |  CDELAY=520
CDELAY=0                             |  CDELAY=520
                                     >  [RF-Write Mode A&B]
                                     >  CMD=No Command
                                     >  FMT=BCD
                                     >  POS=0
                                     >  LM=0


-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us