[Dx4win] Keying problem in Canada

[Mel]

Setup here is almost the same except for a couple of checkboxes about 
paddle dog and paddle echo... whatever that is...I did notice an obvious 
error I had overlooked... I had Router set to Iambic-B ( correct) and 
DX4Win set to Iambic-A (wrong). Maybe that was causing some issues. 
DX4Win is the only program I was using with its own set-up dialog. Not 
really necessary or desirable with the MicroKeyer.

Thanks for the help...

Mel, VE2DC


Cliff Ahrens wrote:
> Hi Mel.  I'm running the micro Keyer II with DX4WIN 7.07.02 and Winkey works
> fine.  Here's a PDF file of micro Keyer DX4WIN setup instructions which I
> followed, and it works fine for me.  You might compare the settings with
> yours.  Good luck!
> 
> 73, Cliff K0CA
> 
> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
> On Behalf Of Mel
> Sent: Friday, May 29, 2009 2:13 PM
> To: DX4WIN
> Subject: [Dx4win] Keying problem in Canada
> 
> While we are on the subject of CW...
> 
> I'm using a MicroKeyer (Winkey) and it works perfectly with Writelog and 
> Logic... ( and a few other programs I have tried) but I have a problem 
> with DX4Win. When I start D4W it completely screws up the keyer... I 
> have found that I can usually restore sanity to it by going to the 
> Microkeyer router program and changing something in Winkey 
> Configuration, then changing it back. It seems to force a reset. 
> Annoying though...
> Has anyone else encountered this issue? Any suggested solutions?
> 
> Mel, VE2DC
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html