[Dx4win] SignaLink USB

[Mel]

OK.., then you have proven that the card works from DX4Win. I suspect 
that when you are using card 1,2 or 3 you have not set the mixer 
application correctly. I think Jim is correct, it should be card 1... I 
have 2 sound cards and that is what I use...

If you have WSPR... if you run it, it will display the audio devices on 
startup and you can see how they are enumerated.

Paul... could you please display some meaningful text instead of Card 
1,2,3,4 in ver 8, if possible?

Please do not use it the way it is configured now Al... I already hear 
too many Windows noises on 14.07 ;-) If you do, disable the Windows 
sound theme.

Mel...

Alan Walters wrote:
> Thanks to Jim, Kostas and Mel.
> 
>  
> 
> I tried Card 0, 1, 2, and 3 with no success.  So I returned to Control
> Panel/Sounds and Audio Devices/Audio and Changed the Default sound card to
> "USB Audio CODEX".  Then returned to DX4Win and selected Default.  All works
> OK now except no DX announcements - a secondary consideration - in fact I
> needed to change Preferences/Packet1/DX Alerts to "None" to prevent a spot
> from keying the radio.
> 
>  
> 
> I will leave well enough alone for now but still want to see if I can get
> the USB soundcard to work using the Card selections other than Default.  But
> for now all is OK.  Thanks again to Jim, Kostas and Mel.
> 
>  
> 
> 73, de Al - K5NOF SK
> 
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>