[Dx4win] Error Message

[Bill AC0W]

Thanks Guy,

The CW Keyer was still running and was the cause of the error. Must remember
to stop radio and stop Winkeyer before exiting just in case next time I
don't use them. Then there are no issues.

Biggest hassle is when this problem occurs I also can not save changes to
the log.

Thanks again,

Bill
AC0W

-----Original Message-----
From: ON4AOI [mailto:on4aoi at skynet.be] 
Sent: Monday, March 23, 2009 3:46 AM
To: 'Bill AC0W'
Cc: dx4win at mailman.qth.net
Subject: RE: [Dx4win] Error Message

Bill,

This is probably a USB problem, same error occurs when using USB - Winkey
and for some unknown WINDOWS reason the serialport number has changed or the
device has been removed or shut off
B4 DX4WIN is closed.     

Guy ON4AOI


-----Oorspronkelijk bericht-----
Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
Namens Bill AC0W
Verzonden: maandag 23 maart 2009 5:06
Aan: 'DX4WIN POSTINGS'
Onderwerp: [Dx4win] Error Message

Running DX4Win 7.03.16, periodically when exiting I get this message:
 
An exception occurred!
Thread Error: Access is denied (5)
 
When I get this error I can not exit DX4Win. The only is to go to Task
Manager and end task.
 
Normal occurs when I am not connected to the radio, but I also have Stop
Radio selected.
 
I've tolerated it for a while but it is starting to get annoying.
 
Any suggestions?
 
Bill
AC0W
______________________________________________________________
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html