[Dx4win] ICOM IC-7600 DX4WIN support?

[ON4AOI]

Hi George,
Did the new 7600 rigfiles I sended you yesterday work? Because
It is not clear in your mail if you used those that I wrote 

Concerning MMTTY,
I only have a solution for FSK to work via the USB connection
Not for AFSK, for FSK you need to put a dll in the mmtty directory
And use EXTFSK in mmtty setup, If you don´t find the dll on the mmtty
Webpage I can sent it to you

Guy       


> -----Oorspronkelijk bericht-----
> Van: george [mailto:goofyham at rochester.rr.com]
> Verzonden: zondag 28 juni 2009 20:34
> Aan: Guy Dewaelhens
> Onderwerp: Re: [Dx4win] ICOM IC-7600 DX4WIN support?
> 
> Guy;
> I got the 7600 talking to my computer through the USB connection. The
> packet
> clicks work fine to change the frequency and mode.
> Now I'm trying to get MMTTY working with this set up. I can receive
> RTTY
> fine but cannot send AFSK to the 7600 using the MMTTY program. MMTTY
> apparently does not like the virtual Com port assigned by the Icom
> driver
> which is Com7.
> I also have two sound cards in my computer so I suspect this may be my
> problem.
> By the way I also have the same problem with PSK31 DigiPan. It receives
> fine
> but no audio from the computer to the 7600 in transmit.
> I guess this USB/7600 stuff is kinda new and I'm blazing a trail.
> Thanks for your help.
> George W2YJ