[Dx4win] DX4WIN / RigBlaster Duo

[ON4AOI]

Hi Kay,
Don´t know how the setup has to be done for the rigblaster duo but I think
It will be normally impossible when you use 2 different radio´s (brand),
Every brand use
there own commands and howto communicate with their radios. In dx4win and
other programs
both radios are separately connected and work fine with there own drivers.

BUT

If this unit translate all commands for different
radios(yaesu-icom-K2-tentec-etc)
to one command set (for example kenwood commands)
it is maybe possible when you set dx4win to use the kenwood.rig


Guy ON4AOI
  

-----Oorspronkelijk bericht-----
Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
Namens Kay Craigie
Verzonden: zaterdag 3 januari 2009 20:31
Aan: dx4win at mailman.qth.net
Onderwerp: [Dx4win] DX4WIN / RigBlaster Duo

My OM is trying to configure his Elecraft K2 and Yaesu FT-450 to work with a
RigBlaster Duo and DX4WIN (7.03.16). The two rigs work fine with DX4WIN if
connected to the computer separately as Rig 1 and Rig 2. But with the Duo in
line, DX4WIN isn't happy at all. Neither is any other logging software we
have on his computer, for that matter. If anyone has successfully configured
a RigBlaster Duo with DX4WIN, please contact me. BTW, we've used
single-radio RigBlasters in the past without a hitch, so we're not newcomers
to West Mountain Radio gear. Thanks & 73 - Kay N3KN

_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win