[Dx4win] Mikrokeyer II and dx4win with IC7800

[Geir Ø Eriksen]

Can't get the ic7800 and dx4win(8.03) to send audio in psk mode (it works in
lsb or usb and rtty also)

have tried the suggestions from Joe but no luck!

anyone have this working ??

 

BR

LA5SJA

Geir  Eriksen

Mob 95102334

 

Fra: microHAM at yahoogroups.com [mailto:microHAM at yahoogroups.com] På vegne av
Geir Øyvind Eriksen
Sendt: 5. mars 2008 15:47
Til: microHAM at yahoogroups.com
Emne: RE: [microHAM] Mikrokeyer II and dx4win with IC7800

 

Have tried it but still no audio out

What am I missing here?

Geir LA5SJA

Fra:  <mailto:microHAM%40yahoogroups.com> microHAM at yahoogroups.com [mailto:
<mailto:microHAM%40yahoogroups.com> microHAM at yahoogroups.com] På vegne av
Joe Subich, W4TV
Sendt: 4. mars 2008 21:39
Til:  <mailto:microHAM%40yahoogroups.com> microHAM at yahoogroups.com;
<mailto:%27Dx4win%40Mailman.Qth.Net> 'Dx4win at Mailman.Qth.Net'
Emne: RE: [microHAM] Mikrokeyer II and dx4win with IC7800

> I Have an mikro keyer II and IC 7800 and wonder if there is a 
> way to use PSk as mode.
> When using psk in dx4win, i get the radio to key but no 
> output audio it works fine in lsb/usb.

A setup guide for microKEYER II and DX4Win is available via the 
"Download Documents" link in Router's Help menu. 

microKEYER and microKEYER II are designed to operate in digital 
modes (AFSK, PSK31, etc.) with audio to the Icom radios via the 
ACC jack. Confirm that the 7800 is configured to accept audio 
via the ACC1-A jack when selecting the Data modes (Data, -D1, -D2 
or -D3). See page 12-7 and 12-8. Normal operation would be to 
set "Data Off Mod = Mic" and set "Data1 MOD", "Data2 MOD", and 
"Data3 Mod = ACC1-A." 

73, 

... Joe Subich, W4TV 
microHAM America 
 <http://www.microHAM-USA.com> http://www.microHAM-USA.com 
 <http://groups.yahoo.com/group/microHAM>
http://groups.yahoo.com/group/microHAM 
 <mailto:support%40microham.com> support at microham.com <
<mailto:support%40microham.com> mailto:support%40microham.com>