[Dx4win] CW and Esc

[Erkki Heikkinen]

I am using 8.03 and Microkeyer also, but can't reproduce this. The ESC
works just like in earlier versions and cancels the rest of the canned
message. Doesn't affect the real-time mode either.

Maybe it is OS related? Here using XP.

73 Erkki OH2BF


> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net 
> [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of John Shaw
> Sent: Thursday, December 24, 2009 10:23 PM
> To: dx4win at mailman.qth.net
> Subject: Re: [Dx4win] CW and Esc
> 
> 
> 
> The situation becomes more dysfunctional when using Winkey as 
> the ESC character is not sent to the Winkey chip so it 
> belligerently continues to complete the last message sent to it.
> 
> 73 John ZL1BYZ
> 
> -----Original Message-----
> From: Dick Grolleman [mailto:groll064 at planet.nl] 
> Sent: Friday, 25 December 2009 8:49 a.m.
> To: John Shaw
> Subject: Re: [Dx4win] CW and Esc
> 
> Hi
> 
> don't know the answer, but Nodir is right. When I owrked a 
> few this afternoon using  Dx4IN to log and send CW I also had 
> the problem. Wsc should just stop the CW nothing else.
> 
> 73 de Dick PA3FQA
> ----- Original Message -----
> From: "John Shaw" <jnshaw at internet.co.nz>
> To: <dx4win at mailman.qth.net>
> Sent: Thursday, December 24, 2009 8:34 PM
> Subject: Re: [Dx4win] CW and Esc
> 
> 
> >
> > Hi Nodir,
> >
> > No one has commented on this.  Sorry Nodir I don't have the answer, 
> > I'm still a dinosaur living happily pre this change.  
> Correct me if I 
> > am wrong but I think it was changed at the request of the users, so 
> > please can someone tell us how you instantly stop a CW message and 
> > remain in the real time entry mode with the later versions 
> of DX4WIN. 
> > Is there another key that functions like ESC used to?
> >
> > 73 John ZL1BYZ.
> >
> > -----Original Message-----
> > From: dx4win-bounces at mailman.qth.net
> > [mailto:dx4win-bounces at mailman.qth.net]
> > On Behalf Of Nodir Tursoon-Zadeh
> > Sent: Thursday, 24 December 2009 5:09 a.m.
> > To: dx4win at mailman.qth.net
> > Subject: [Dx4win] CW and Esc
> >
> > Hi,
> >
> > When in Real-Time (F9) CW mode (Special Keys Active) I need to stop
> > sending
> > CW message I press Esc as in Ver. 7
> >
> > Instead of stop sending CW program cancels Real-Time mode. Very
> > inconvenient
> > especialy in pile up enviroment.
> >
> > Any suggestions please?
> >
> > I use Mikrokeyer with Winkey built in.
> >
> >
> >
> >
> > Regards,
> >
> > Nodir Tursoon-Zadeh
> > EY8MM
> > http://www.ey8mm.com/
> >
> >
> > ______________________________________________________________
> > Dx4win mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Dx4win at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> >
> >
> > ______________________________________________________________
> > Dx4win mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Dx4win at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> 
> 
> 
> 
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>