[Dx4win] 8.03 Problem

[ON4AOI]

This is a reply from Dusty off the reflector to Paul and myself
Probably you have the same problem if you have K3 and maybe also for ft2000

Guy ON4AOI

>My radio and DX4WIN are now working properly.  I will explain what I did.
I have a K3 transceiver and adjusted the PTT command which is defaulted to
OFF-OFF.  I had it >adjusted to RTS-DTR and it worked fine with ver 7.07.
After reading some note I picked up someplace, it said to use DTR-OFF which
I tried and of course, it didn't work.  I >then went into DX4WIN
-File-Preferences-Radio and checked DTR High and RTS High(which were
unchecked in my working ver 7.07).  It still did not work.  I then changed
my K3 >back to RTS-DTR and the keyboard worked.  Then I went back into
DX4WIN and unchecked DTR high and RTS high(one at a time) and with one and
then the other, the keyboard >still worked and it is still working.  Paul,
that makes no sense to me at all.  In other words, I am right back where I
started but now it works properly.  I guess all's <well that end's well.  
>Thank you for your time.  Have a very Happy Holiday Season.
>73, Dusty - K3WC

> -----Oorspronkelijk bericht-----
> Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
> bounces at mailman.qth.net] Namens Roger D Johnson
> Verzonden: dinsdag 22 december 2009 14:23
> Aan: dx4win at mailman.qth.net
> Onderwerp: Re: [Dx4win] 8.03 Problem
> 
> Rick Murphy wrote:
> > On Mon, Dec 14, 2009 at 3:12 PM, Dusty Chapman <k3wc at verizon.net>
> wrote:
> >
> >>     I just downloaded 8.03 to replace 7.07.  I am having a small
> problem.
> >> When trying to use the CW keyboard, hitting any key or macro, keys
> the rig
> >> with a solid carrier/tone.  The only way to turn it off is to shut
> down my
> >> K3 or go into the CW menu, hit Settings, then Tune, then Off.
> Needless to
> >> say I didn't have that problem with 7.07.  "All" settings are the
> same.  The
> >> only thing I did differently was to put 8.03 into C:\Amateur
> Radio\dx4w803
> >> instead of C:\dx4w803.   Before 7.07, all my DX4WIN versions were in
> the
> >> Amateur Radio\ folder, but directions said to put 7.07 in C:\.  I am
> sure
> >> there was a reason for this.  I have loaded 8.03 into C:\ and also
> it is
> >> still in C:\ Amateur Radio\dx4w803.  Can I just copy all the files
> from C:\
> >> Amateur Radio\dx4w803 into C:\dx4w803 or must I import all the stuff
> into it
> >> from 7.07?
> >>
> >
> >
> I also have the 8.03 keying problem. 8.02 works fine. I also notice alt
> K won't bring up
> the CW keyboard in 8.03.
> 
> 73, Roger
> 
> --
> Remember the USS Liberty (AGTR-5)
> http://ussliberty.org/
> 
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html