[Dx4win] ZK2V

[Andy Hewitt]

Jim,

I knew you would have the SOLUTION! That worked FB! I put a date in of 
01-01-2009 and actually got 103 confirmations from qsos, I suppose that had
been confirmed after subsequent downloads. I suppose this is an exercise
that one should do from time to time as I have also myself been adding
really old qsos from my paper log to DX4Win and uploading those from time to
time. The stations I worked obviously would not get those if they did not go
back a while occasionally when doing downloads.

Thank you very much
73
Andy G3SVD


-----Original Message-----
From: Jim Reisert [mailto:jjreisert at gmail.com] On Behalf Of Jim Reisert AD1C
Sent: 28 August 2009 15:57
To: Andy Hewitt
Subject: Re: [Dx4win] ZK2V

LoTW always starts downloading from the LAST day you downloaded, so it 
only has new confirmations.

Try downloading lotwreport.adi again, but this time with a really old 
starting date, and see if the ZK2V QSOs are found in the lotwreport.adi 
file.  THEN import LoTW into DX4WIN using "duplicate QSO sets Upl Conf 
flag".

- Jim

On 8/28/2009 12:44 AM, Andy Hewitt wrote:
> Jim,
> Thanks.
>
> I am still using version 7.06 of DX4Win.
>
> I cannot be sure that it was included in a download as the most recent
> download replaced the previous one in the SAVE folder. If it was not
> included I cannot think why not as Chris uploaded his logs to LoTW within
a
> day or so of finishing his stint on ZK2 and I saw then that I had the
> relevant crosses in the matrix.
>
> 73
> Andy G3SVD
>
> -----Original Message-----
> From: jjreisert at gmail.com [mailto:jjreisert at gmail.com] On Behalf Of Jim
> Reisert AD1C
> Sent: 27 August 2009 22:15
> To: Andy Hewitt
> Cc: dx4win at mailman.qth.net
> Subject: Re: [Dx4win] ZK2V
>
> On Thu, Aug 27, 2009 at 2:39 PM, Andy Hewitt<andyphewitt at btopenworld.com>
> wrote:
>
>> I worked Chris ZK2V on 20m  on three modes. My qsos were uploaded to LoTW
> in
>> June and were immediately shown ad QSL'd. They appear as such in the
Award
>> Credit Matrix with X for each mode and 20m. Since that date I have
>> downloaded a lotw report a couple of times but this entity does not flip
> the
>> UPL cfm flag to Y in DX4Win. Can anyone suggest why? Can I just do it
>> manually?
>
> Are you 100% sure that ZK2V was in the ADIF file you downloaded from LoTW?
>
> What version of DX4WIN are you using?
>
> If version 8, in your DXCC award preferences, are both QSL and LoTW
checked?
>
> - Jim
>

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us