[Dx4win] Ver.8.1 - Groups - Import - Unexpected selection.

[Stefano Cipriani]

Jim
I'm testing now the v. 8.1....
Exported separated groups from Ver. 8.01
Create new log in Vers. 8.01
Create groups on it.
Imported the four .DXQ
But the import export routines have some problems.....

Not problem copying from Vers 7 to Vers 8.

Ciao Jim
Stefano, I0MWI



----- Original Message ----- 
From: "Jim Reisert AD1C" <jjreisert at alum.mit.edu>
To: "Stefano Cipriani" <i0mwi at email.it>
Sent: Friday, August 14, 2009 2:32 AM
Subject: Re: [Dx4win] Ver.8.1 - Groups - Import - Unexpected selection.


Why did you import?  All you have to do is copy the .DXL file from the
old version to the new version.

73 - Jim AD1C

On Thu, Aug 13, 2009 at 5:50 PM, Stefano Cipriani<i0mwi at email.it> wrote:
> So Jim,
> to day I have completed the import of all groups (002 - 003 - 004)
> in the I0MWI_TEST.DXL and I found another anomaly.
> 48,275 QSOs in the Original Log.
> 48,225 QSOs in the Destination Log.
> 50 QSOs LOST.
> I have verified carefully the two logs.
> The algoritm have considered DUPES some QSOs with the same call,
> same band, same mode, and time between ZERO and Ten minutes.
> In one case (GB150VC) the difference is five days (!).
> Consider that the QSOs with NOT difference in the Time
> are often contacts with american guys operating from
> different Counties, or contacts with same station using different
> reference numbers, and I have repaired them changing
> the time one minute later..)
> But the problem rest.... apparently the algoritm does'nt
> consider the time value.....
> I hope this helps Paul.
> 73
> Stefano, I0MWI
>
>
>
> ----- Original Message -----
> From: "Jim Reisert AD1C" <jjreisert at alum.mit.edu>
> To: "Stefano Cipriani" <i0mwi at email.it>
> Cc: "DX4WIN Reflector" <dx4win at mailman.qth.net>
> Sent: Thursday, August 13, 2009 2:03 AM
> Subject: Re: [Dx4win] Ver.8.1 - Groups - Import - Unexpected selection.
>
>
> This is due to the "," in the Frequency field (European Windows
> versions). Been discussed on the reflector before. I'm sure it's on
> Paul's list.
>
> 73 - Jim AD1C
>
> On Wed, Aug 12, 2009 at 5:47 PM, Stefano Cipriani<i0mwi at email.it> wrote:
>> Paul ... and BetaTesters (!),
>> Very strange result found:
>> 1° - Exported a selected group 001 from my V.8.1 log,
>> using a DX4WIN8 export file.(I0MWI_001.DXQ)
>> 2° - File / New log, creating a new I0MWI_TEST.DXL
>> 3° - Added a dummy qso in group 000.
>> 4° - Edit/Add more groups (001 - 002 - 003 - 004)
>> 5° - Exit the program
>> 6° - Open again and import the I0MWI_001.DXQ.
>> 7° - Deleted the dummy qso.
>> 8° - Exit, then open again the I0MWI_TEST.DXL
>> 9° - The program show only the QSOs, that have the
>> new field "Freq KHz" populated with a frequency.
>> NOT FILTER ACTIVATED, but is necessary go to
>> Filter/Cancel filter to have all QSOs selected.
>> This happen any time I open the I0MWI_TEST.DXL....
>>
>> If I open the regular I0MWI.DXL, mouved from vers. 7
>> all is OK........


-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us 

 
 
 --
 Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP autenticato? GRATIS solo con Email.it http://www.email.it/f
 
 Sponsor:
 Legal.email.it: posta elettronica certificata per l'invio di email con valore legale e SMS di notifica
 Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=8978&d=14-8