[Dx4win] Ver.8.1 - Groups - Import - Unexpected selection.

[Stefano Cipriani]

So Jim,
to day I have completed the import of all groups (002 - 003 - 004)
in the I0MWI_TEST.DXL and I found another anomaly.
48,275 QSOs in the Original Log.
48,225 QSOs in the Destination Log.
50 QSOs LOST.
I have verified carefully the two logs.
The algoritm have considered DUPES some QSOs with the same call,
same band, same mode, and time between ZERO and Ten minutes.
In one case (GB150VC) the difference is five days (!).
Consider that the QSOs with NOT difference in the Time
are often contacts with american guys operating from
different Counties, or contacts with same station using different
reference numbers, and I have repaired them changing
the time one minute later..)
But the problem rest.... apparently the algoritm does'nt
consider the time value.....
I hope this helps Paul.
73
Stefano, I0MWI



----- Original Message ----- 
From: "Jim Reisert AD1C" <jjreisert at alum.mit.edu>
To: "Stefano Cipriani" <i0mwi at email.it>
Cc: "DX4WIN Reflector" <dx4win at mailman.qth.net>
Sent: Thursday, August 13, 2009 2:03 AM
Subject: Re: [Dx4win] Ver.8.1 - Groups - Import - Unexpected selection.


This is due to the "," in the Frequency field (European Windows
versions).  Been discussed on the reflector before.  I'm sure it's on
Paul's list.

73 - Jim AD1C

On Wed, Aug 12, 2009 at 5:47 PM, Stefano Cipriani<i0mwi at email.it> wrote:
> Paul ... and BetaTesters (!),
> Very strange result found:
> 1° - Exported a selected group 001 from my V.8.1 log,
> using a DX4WIN8 export file.(I0MWI_001.DXQ)
> 2° - File / New log, creating a new I0MWI_TEST.DXL
> 3° - Added a dummy qso in group 000.
> 4° - Edit/Add more groups (001 - 002 - 003 - 004)
> 5° - Exit the program
> 6° - Open again and import the I0MWI_001.DXQ.
> 7° - Deleted the dummy qso.
> 8° - Exit, then open again the I0MWI_TEST.DXL
> 9° - The program show only the QSOs, that have the
> new field "Freq KHz" populated with a frequency.
> NOT FILTER ACTIVATED, but is necessary go to
> Filter/Cancel filter to have all QSOs selected.
> This happen any time I open the I0MWI_TEST.DXL....
>
> If I open the regular I0MWI.DXL, mouved from vers. 7
> all is OK........
>
> So Good Hunting............
> 73
> Stefano, I0MWI


-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us 

 
 
 --
 Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP autenticato? GRATIS solo con Email.it http://www.email.it/f
 
 Sponsor:
 Posta Elettronica Certificata con valore legale e notifica via SMS: scopri legal.email.it
 Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=8977&d=14-8