[Dx4win] BandMap wildly wrong freq?

[Mel]

Here is a suggestion.

I decided to try a conventional FTDI USB to serial converter I have 
here. It works fine. It's the one Dennis sells on his website at 
http://www.hosenose.com/interfaces.asp#USB-RS232 for his logging program.

You could try one of those... at least you know it has been tested on at 
least 2 logging programs.

Robert Morris wrote:
> Hi Mel,
> 
> I tried the file and I still have problems. 
> With the rig set on 144.200 and looking at the bandmap:
> 
> Frequency at the top of the bandmap changes from 144.200
> to 125.037.81 and then back to 144.200 at random intervals.
> Sometimes 5, 6, 20 or 30 seconds between the change in display.
> 
> The band map, when 144.200 is displayed shows the red arrow 
> as it should, on 144.200. The arrow goes away when the 125 freq
> is displayed.
> 
> Going to sit back and wait to see if and what someone does in the
> way of a fix.
> 
> Thanks again for your efforts.
> Take care
> 73/Bob
> 
> ----- Original Message ----- 
> From: "Mel" <ve2dc at videotron.ca>
> To: "Robert Morris" <rsmorris at nelsoncable.com>
> Sent: Thursday, August 13, 2009 8:55 AM
> Subject: Re: [Dx4win] BandMap wildly wrong freq?
> 
> 
> Here you go. It is configured for 9600 baud. Note I have given it a 
> different name IC-910... shorter and you can keep both.
> 
> Don't try to edit it with the D4W radio file editor... that also has a 
> problem that I don't think has been addressed in v8. It can't edit 
> frequencies over 1GHz for upper frequency limit.
> 
> Let me know if you have any problems...
> 
> Mel...VE2DC
> 
> 
>