[Dx4win] WPX window and WAS window

[Jim Reisert AD1C]

Yes, I correct my message as well.  The "box" does move in 7.07, but
DX4WIN can't determine the state.  I tried spotting both a previous
QSO from my log (so DX4WIN would already know the state), and putting
the state in the comments field.  In either case, the title bar of the
window did not name the state.

Perhaps an improvement for some future version would be to cross-check
the spotted station against the log, and try to determine the state,
county, grid and IOTA, even if those are not in the spot itself.

- Jim

On Sat, Aug 8, 2009 at 10:39 PM, Paul van der Eijk<pvandereijk at cox.net> wrote:
> My previous message may have been misleading; the WAS cannot update
> based on packet info, but should adjust the location of the band/mode
> selector.
>
> --Paul
>
> Matt Cassarino wrote:
>> Hello all
>>
>> Does anyone use the WPX window or WAS window ? I haven't seen any posts on
>> this about 8.01.
>>
>> I find that
>>
>> 1.the band box is no longer changing with incoming spots in the WAS window
>> and data is not appearing as to what Ive worked. Also WAS = shows nothing in
>> the title bar.
>>
>> 2. the WPX data is not appearing either though the band box does shift
>> around with spots coming in. Also WPX= shows nothing in the title bar.
>>
>> A new spot comes in and where 6 and 7  automatically looked up where I had
>> it worked and confirmed, it shows all the boxes for band and mode with
>> nothing in them.
>>
>> I reinstalled 7.07.02 and it works properly.
>>
>> While this is going on, DXCC , WAZ and Field windows are working fine.
>>
>> The WPX colors in the spot window are fine in 8.01.
>>
>> Thanks

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us