[Dx4win] Further to "Problems with Preferences"

ON4AOI on4aoi at skynet.be
Sun Apr 26 23:54:04 EDT 2009


Glad to help you out Karl

GUY ON4AOI

> -----Oorspronkelijk bericht-----
> Van: Karl Oyster [mailto:k1ko at cox.net]
> Verzonden: maandag 27 april 2009 1:43
> Aan: ON4AOI
> Onderwerp: Re: [Dx4win] Further to "Problems with Preferences"
> 
> Guy,
> 
> Thanks for the very specific directions.  I followed them
> carefully and now everything is working as it should.  I
> appreciate your taking the time to get me straight on this!!
> 
> 73 & DX!!
> 
> Karl, K1KO
> ----- Original Message -----
> From: "ON4AOI" <on4aoi at skynet.be>
> To: "'Karl Oyster'" <k1ko at cox.net>
> Cc: <dx4win at mailman.qth.net>
> Sent: Tuesday, April 21, 2009 11:35 AM
> Subject: RE: [Dx4win] Further to "Problems with Preferences"
> 
> 
> Well Karl,
> I am not really 100% sure but I think your dx4win.cfg is corrupted
> If you are sure that you are in expert mode this shouldn´t be
> happening.
> try the following
> Make a full backup on another disk or usbstick etc
> First write a dx4win.ini file(so you can import later on)
> Delete dx4win.cfg in your save directory
> Restart dx4win and you have a clean startup screen now
> First go into preferences and set you in expert mode
> Try to change what didn´t work, save it and google a little around
> in dx4win
> If all remains normal you can merge your ini file now, save it and
> then
> close dx4win
> Restart and try again in preferences to change something,
> if all works ok then your previous dx4win.cfg file
> Was corrupted
> 
> Guy ON4AOI
> 
> > -----Oorspronkelijk bericht-----
> > Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
> > bounces at mailman.qth.net] Namens Karl Oyster
> > Verzonden: dinsdag 21 april 2009 17:25
> > Aan: DX4WIN
> > Onderwerp: [Dx4win] Further to "Problems with Preferences"
> >
> > Hello again....
> >
> > After sending my previous email I decided I ought to check out
> > the
> > other "preferences" pages.  Here's what I found:
> >
> > 1.  Under "control" -- same problem -- won't allow entries
> > 2.  Under "CW"         same problem
> > 3.  Under "Packet1"    same problem for "warning messages" and
> > "audio/voice."
> > 4.  Under "Packet2"  -- no problems
> > 5.  Under "RTTY"     -- no problems
> > 6.  Under "Ext Data" -- same problem for "address search"
> > 7.  Under "F2 key"   -- no problems
> > 8.  Under "DXCC", "WAS," "WAZ," and "WPX" -- no problems
> > 9.  Under "Rep/Lab"  -- same problem with "embellishments."
> >
> > I apologize for not having checked all this before sending the
> > email -- getting old and absent-minded.
> >
> > 73,
> >
> > Karl, K1KO
> > Virginia Beach, VA
> >
> > ______________________________________________________________
> > Dx4win mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Dx4win at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list:
> > http://www.qsl.net/donate.html



More information about the Dx4win mailing list