[Dx4win] How do I print both QSO *and* addresses labels?

[Larry Gauthier (K8UT)]

Jim,

My inelegant method for doing a batch of stateside direct QSL's is as 
follows:

1. Set DX4Win filter for Prefix = "K", Label = "Y", Method = "Direct"
2. Open DX4Win Window, "Logbook"
3. For each QSO listed in Logbook
     a. Set the QSL Mgr = station callsign
     b. Press F3, then <Enter> to get to QRZ.COM callsign lookup
     c. Press <Mailing Label> in QRZ.COM for well-formatted mailing label
     d. Copy/Paste from QRZ.COM mailing label to DX4Win QSL Mgr address
4. Print the labels from DX4Win Labels -> Print QSL Labels.

It ain't pretty, but it works.

-larry
K8UT
----- Original Message ----- 
From: "Jim Reisert AD1C" <jjreisert at alum.mit.edu>
To: "DX4WIN" <dx4win at mailman.qth.net>
Sent: Friday, September 05, 2008 13:28
Subject: [Dx4win] How do I print both QSO *and* addresses labels?


I have a bunch of QSOs with USA stations and are marked for labels (QSL 
method = Direct).  There is nothing in the "QSL Manager" box for any of 
those QSOs.

How do I make DX4WIN print both the QSO *and* the address labels together 
for all those QSOs (which it can lookup from the local RAC callbook 
database)?

Thanks & 73 - Jim AD1C

 --
Jim Reisert AD1C/Ø, <jjreisert at alum.mit.edu>, http://www.ad1c.us

_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win